Warrior Universal Panel Data Sheet: Logging and Perforating on One Panel
The Warrior Universal Panel is a 2U surface unit that runs logging acquisition and perforating control together. Specifications, connections, power, coverage, and features in one place.
The Warrior Universal Panel is a 2U, 19 inch rack surface unit that combines logging acquisition and perforating control in one panel, with a 600 W programmable digital power supply.

The Warrior Universal Panel is a 2U, 20.5 lb surface unit that combines logging acquisition and perforating control, with a 600 W programmable digital power supply, compatibility with 85% of cased hole tools, and 95% of addressable switch systems across manufacturers.
Yes. The Warrior Universal Panel is a 2U surface unit that consolidates logging acquisition and perforating control, a 2-in-1 command point built on the Warrior platform. This page is the data sheet: specifications, connections, power, coverage, and features in one place.
At a glance
- Function: Logging acquisition and perforating control, 2-in-1
- Form factor: 2U, standard 19 inch rack
- Weight: 20.5 lbs
- Power supply: 600 W digital, fully programmable
- Cased hole tool coverage: 85% of cased hole tools across manufacturers
- Switch coverage: 95% of addressable switch systems
- Installation: Drop in replacement with the same cabling and the same connectors
The panel combines the Standard Interface Panel and a digital 600 W power supply (400 V, 1.5 A) in one unit. It replaces the two panel setup of a separate logging panel and a separate shooting panel.
Specifications
- Dimensions: 19 by 19 by 3.5 inches (2U, standard 19 inch rack)
- Weight: 20.5 lbs
- AC input: 100 to 240 VAC, 50/60 Hz
- DC input: 12 to 15 VDC
- External supported input: 0 to ±500 VDC at 2 A
- Power output: 0 to ±400 VDC at 1.5 A (sustained)
- Digital power supply: 600 W DC, fully programmable per tool requirements
Connections
Inputs
- Line In
- USB In
- Encoder In
- Transducer In
- Wellhead Pressure In
Outputs
- AUX Out (extension)
- Serial RS232 Out
- USB Out (two ports)
- Shooting Lights
External interfaces
- Sondex ULMB / Panel
- External Power
Tool and switch coverage
Warrior is universally compatible across manufacturers. The Universal Panel covers 85% of cased hole tools and 95% of addressable switch systems, including software and hardware switches, internal and external. The two figures are always shown together.
The platform reads tools through digital signal processing, so one set of hardware understands the tool string in front of it. Telemetry can be fine tuned through electronic and digital filters and gain sliders.
Supported addressable switch systems
AccuSelect, BlackFrac, ControlFire, E-Oilstar, GeoDynamics, ISI, PerfStrike, Phoenix, Rock E-Select, SRS, Tru-Perf, ASFS, Guardian AFS, Owen GoFire, and Well Good.
Features: logging
- High power digital power supply: Delivers up to 600 W of DC power, fully programmable to match the tool in use.
- External power connection: An external supply can provide up to 500 V at 2 A sustained, so the panel can process telemetry into Warrior from high power tools connected this way.
- Always on CCL: The panel receives passive CCL even in SAFE mode.
- DC powered operation: With a 12 VDC input, the panel can read CCL and depth and communicate with the software even when AC power is off. No power reaches downhole while AC is off, meeting RP 67 requirements.
Features: perforating
- Continuous operator engagement: Two handed engagement for the entire firing sequence, from the first step to the last.
- Pre fire verification: Switch serial number, voltage and current, and shot depth versus current depth are all confirmed before arming.
- One panel, one sightline: No context switching between logging and perforating at the critical moments of the job.
- Firing controls: Two button firing and a spring loaded release.
Software and display modes
Warrior shows each crew member what the job needs, through three display modes: logging view, perforating stage control, and combined operations. Acquisition data streams to the Warrior software in real time. Data exports as LAS, DLIS, and PDF.
The software runs on a computer that can be connected to your network over Ethernet. The panel has no Ethernet connector.
Configurations
- Analog gauge model: Analog gauges for CCL, voltage, and current, with external power. 120 to 220 V. First production release.
- Digital display model: Digital displays with a user interface customized to the tool service in use, with external power. 120 to 220 V. Coming 2027.
Why consolidate
A conventional setup uses two panels, extra cables, and extra connections, and every one of them is a place for a fault to hide. The Universal Panel puts logging acquisition and perforating control in one 2U unit, with fewer boxes, fewer cables, and one interface to trace a fault from.
Get the specifics for your fleet
Compatibility figures describe the market. Send your tool list and SDS engineering will confirm what runs on the Universal Panel. Warrior is built by Scientific Data Systems in Houston, with 34 years in the field and active in 87 countries.
Contact SDS on 281-398-1612 or visit warriorsystem.com.
All third party product and company names are trademarks or registered trademarks of their respective owners. Their use here is for compatibility identification only and does not imply any affiliation with or endorsement by those owners.
Frequently Asked Questions
Quick answers on the Warrior Universal Panel.
Can one surface panel run both logging and perforating?
Yes. The Warrior Universal Panel is a 2-in-1 surface unit that handles logging acquisition and perforating control through one 2U panel and one interface, replacing the separate logging and shooting panels of a conventional two panel setup.
What are the dimensions and weight of the Universal Panel?
19 by 19 by 3.5 inches, 2U for a standard 19 inch rack, and 20.5 lbs.
What power does the Universal Panel accept and deliver?
It accepts 100 to 240 VAC at 50/60 Hz, 12 to 15 VDC, and an external supported input of 0 to ±500 VDC at 2 A. Output is 0 to ±400 VDC at 1.5 A sustained, from a 600 W digital power supply that is fully programmable per tool requirements.
Does the Universal Panel have an Ethernet connector?
The panel has no Ethernet connector. The Warrior software runs on a computer that can be connected to your network over Ethernet.
What happens to the panel if AC power is lost?
With a 12 VDC input, the panel can read CCL and depth and communicate with the software even when AC power is off. No power reaches downhole while AC is off.
What does the crew see on a one panel job?
Warrior shows each role what the job needs through three display modes: logging view, perforating stage control, and combined operations.
Which tools and switches does the Universal Panel run?
Warrior is compatible with 85% of cased hole tools and 95% of addressable switch systems across manufacturers, including software and hardware switches, internal and external. SDS engineering will confirm your specific tool list.
Is the Warrior Universal Panel the same thing as Warrior?
No. Warrior is the platform. The Universal Panel is a product within it, alongside the Standard Panel and the Warrior software modules.
Sources & Further Reading
- What API RP 67 Means for How You Choose a Surface Firing System (Warrior Wireline Blog)
- Digital Power Delivery in Wireline Operations (Warrior Wireline Blog)
- Which Wireline Acquisition Systems Run Third-Party Tools? (Warrior Wireline Blog)
