Call SDSRequest a Quote
Product

Can One Surface Panel Run Both Logging and Perforating?

Yes. One surface panel can run both logging acquisition and perforating control. This post covers what a two panel setup asks of the crew, what changes on one panel, what it means for each of the five crew roles, what stays the same, and three questions to ask any system.

The Warrior Universal Panel is a 2-in-1 surface unit that combines logging acquisition and perforating control in one 2U panel with one interface, replacing the separate logging panel and shooting panel of a conventional two panel setup.

Graphic from Scientific Data Systems for the Warrior Universal Panel. The headline reads "One panel runs both. Logging acquisition and perforating control in one 2U surface unit." On the left, a two panel setup shows one panel that acquires the log and a second panel that controls the shooting, joined by cables. An arrow points to a single Warrior Universal Panel on the right, shown from the front and side with two digital displays, labeled "One 2U unit. One interface."

The Warrior Universal Panel combines logging acquisition and perforating control in one 2U surface unit with one interface and 600 W of programmable digital power, and Warrior is compatible with 85% of cased hole tools and 95% of addressable switch systems across manufacturers.

Yes. The Warrior Universal Panel is a 2-in-1 consolidation of logging acquisition and perforating control. One 2U surface unit and one interface run both jobs, so the crew works from a single command point instead of two panels.

This post covers what a two panel setup asks of the crew, what changes when one panel does the work, what it means for each role on the crew, what stays the same, and three questions worth putting to any system that claims to do both.

What a two panel setup asks of the crew

A conventional cased hole job calls for two surface systems. One panel acquires the log. A second panel controls the shooting. Between them sit extra cables, extra connections, and a handover at the point where the job moves from depth correlation to firing.

Each of those is a place for a fault to hide. Each is also a moment where the crew moves to a different screen, a different set of controls, and a different way of working, often while the job is moving quickly.

The wireline industry accepted two panels, extra cables, and compounding failure points as standard. Asking for fewer boxes is a reasonable request.

What one panel does

The Universal Panel brings logging acquisition and perforating control into one 2U unit. One surface unit replaces two. A 600 W programmable digital power supply sits inside it, so power, acquisition, and firing control run from the same command point to the tools, switches, and surface systems you already run.

Acquisition data streams to the Warrior software in real time, so the operator sees data quality and power status in the same view. The software runs on a standard computer that can sit on your network.

Warrior is the platform. The Universal Panel is a product within it, alongside the Standard Panel and the Warrior software modules.

What changes on the job

Rig up. Fewer boxes means fewer cables and fewer connection points to check before the first log pass.

One interface for every role. Warrior shows each crew member what the job needs at that moment. Three display modes cover the work: logging view, perforating stage control, and combined operations. The logging engineer sees the log. The shooter sees stage control. Nobody wades through engineering menus to find the number they need.

Depth stays visible. The panel receives CCL even in SAFE mode, so depth is on screen before anything is armed. With a DC input, the panel stays alive and communicates with the software even when AC is off, and no power reaches downhole while AC is off. The post on what API RP 67 means for how you choose a surface firing system covers how that design meets RP 67 requirements.

Fault finding. A fault that once meant working out which of several boxes was the source can be traced from one interface.

Training. One interface and one workflow to learn, across both logging and perforating work.

Five roles, one platform

A cased hole job runs through five roles. Here is what one panel means for each.

The Operators. Run it right, the first time. Whether you are pulling a log or shooting a stage, Warrior is built so the job runs the same way on every run, and the data you hand off is data you would stake your name on.

The Diagnosticians. Fewer parts, fewer failures. The tool that tests clean in the shop should perform clean in the field. One panel in place of two means fewer failure points and fewer variables to test.

The Supervisors. Five crews, one standard. The same sequence and the same output on every truck in the fleet, with faster mobilization and fewer setup failures before the first log pass.

The Builders. Build anything, run everything. Warrior is an open platform, so the tools you build can run across the wireline market, compatible and field ready from day one.

The Decision Makers. One unit replaces two, and your fleet stays. One 2U panel takes the place of a logging panel and a shooting panel, and it runs the tools and switches you already own. Over 34 years, SDS has supplied more than 5,600 Warrior panels to more than 600 companies on six continents, with direct support by phone, detailed manuals, and an active user forum.

What stays the same

The fleet stays the fleet. Warrior is universally compatible across manufacturers, and the Universal Panel carries that across logging and perforating.

Tool Compatibility at a Glance

  • 85% of cased hole tools
  • 95% of addressable switch systems

Pumpdown perforating is cased hole work, so these are the two figures that carry the most weight on the Universal Panel. Both are always shown together. The switch figure includes software and hardware switches, internal and external.

In cased hole, Warrior runs CCL, multi finger caliper, production logging, cement evaluation, and perforating depth correlation. Surface sensors such as weight indicators, pressure gauges, and temperature sensors feed the same real time data stream. Data exports as LAS, DLIS, and PDF.

The figures describe the market. What matters on your truck is whether Warrior runs the specific tools and switches in your fleet. Our post on which wireline acquisition systems run third party tools explains what the figures mean and how to evaluate an open platform against a closed system.

Three questions to ask any system that claims to do both

  1. Is it one interface or two programs in one box? Ask what the operator sees when the job moves from the log pass to the first stage. On Warrior, the answer is one interface with logging view, perforating stage control, and combined operations.
  2. How many manufacturers' tools and switches does it run? Ask for the figures. On Warrior, the answer is 85% of cased hole tools and 95% of addressable switch systems.
  3. What happens to the cable count and the fault path? Ask how many boxes sit in the answer when something goes wrong. On Warrior, the answer is one 2U unit and one interface to trace from.

Getting the specifics for your fleet

Warrior is built by Scientific Data Systems in Houston, with 34 years in the field and active in 87 countries. Send us your tool list and SDS engineering will confirm what runs on the Universal Panel and what does not.

On your last pumpdown job, where did the time go between the log pass and the first stage: cables, handover, or fault finding? We would like to hear how it plays out in the field. Contact SDS on 281-398-1612 or visit warriorsystem.com.

WarriorUniversal PanelLoggingPerforatingSurface SystemsWireline

Frequently Asked Questions

Direct answers on running logging and perforating from one surface panel.

Can one surface panel run both logging and perforating?

Yes. The Warrior Universal Panel is a 2-in-1 surface unit that handles logging acquisition and perforating control through one 2U panel and one interface, replacing the separate logging and shooting panels of a conventional two panel setup.

Wellsite CrewLogging Engineer + Shooter

What does the crew see on a one panel job?

Warrior shows each role what the job needs at that moment through three display modes: logging view, perforating stage control, and combined operations.

Shop and SupportElectronics Technician + Tool Technician

What power does the Universal Panel supply?

The Universal Panel includes a 600 W programmable digital power supply, so power, acquisition, and perforating control run from one command point.

Shop and SupportElectronics Technician + Tool Technician

Does the Universal Panel have an Ethernet connector?

The panel has no Ethernet connector. The Warrior software runs on a computer that can be connected to your network over Ethernet.

Field LeaderField Service Manager + Operations Manager

How does one panel change rig up and troubleshooting?

Fewer boxes means fewer cables and connection points to check before the first log pass, and a fault can be traced from one interface instead of several boxes.

Decision MakersService Company Leadership + Operator Company Man

Which tools and switches does the Universal Panel run?

Warrior is compatible with 85% of cased hole tools and 95% of addressable switch systems across manufacturers, including software and hardware switches, internal and external. SDS engineering will confirm your specific tool list.

Is the Warrior Universal Panel the same thing as Warrior?

No. Warrior is the platform. The Universal Panel is a product within it, alongside the Standard Panel and the Warrior software modules.

Sources & Further Reading

  1. What API RP 67 Means for How You Choose a Surface Firing System (Warrior Wireline Blog)
  2. Which Wireline Acquisition Systems Run Third-Party Tools? (Warrior Wireline Blog)
  3. Digital Power Delivery in Wireline Operations (Warrior Wireline Blog)
Share

Stay in the loop

Subscribe to the Warrior newsletter for product news, software releases, and support updates, straight to your inbox.